Download New Updated (July) Cisco 352-001 Actual Test 81-90

Ensurepass

QUESTION 81

A switched network is being designed to support a manufacturing factory. Due to cost constraints, fiber-based connectivity is not an option. Which design allows for a stable network when there is a risk of interference from the manufacturing hardware in use on the factory floor?

 

A.

Design the network to include UDLD to detect unidirectional links and take them out of service.

B.

Design the network to include EtherChannel bundles to prevent a single-link failure from taking down a switch interconnection point.

C.

Design the network to include loop guard to prevent a loop in the switched network when a link has too much interference.

D.

Design the network to include BackboneFast on all devices to accelerate failure convergence times.

 

Correct Answer: A

 

 

QUESTION 82

You are hired to design a solution that will improve network availability for users on a campus network with routed access. If the budget limits you to three components, which three components would you recommend in your design proposal? (Choose three.)

 

A.

redundant power supplies in the access routers

B.

standby route processors for SSO in the core routers

C.

standby route processors for SSO in the distribution routers

D.

standby route processors for SSO in the access routers

E.

replace copper links between devices with fiber links

 

Correct Answer: ADE

 

 

QUESTION 83

You are the SAN designer for the ABC Company. Due to budget constraints, there is increased pressure by management to further optimize server utilization by implementing virtualization technologies on all servers and increase virtual machines density. Faced with some SAN challenges, the server team requests your help in the design and implementation of the SAN in the new virtualized environment. In which two ways can NPIV be used in your proposed design? (Choose two.)

 

A.

NPIV is used to assign multiple FCIDs to a single N Port.

B.

NPIV is used to define and bind multiple virtual WWNs (VIs) to a single physical pWWN.

C.

You recommend NPIV so that hosts can be members of different zones.

D.

NPIV can be used to allow multiple applications on the same port to use different IDs in the same VSAN.

 

Correct Answer: AD

 

 

QUESTION 84

Tesla Radio GmbH is going to build a new research lab network based on a set of switches that would connect to their existing enterprise network. They are considering a design that would guarantee loop-free behavior within the set of switches. The design would also allow the group of switches to seem like a single switch to the enterprise network, because it is owned by a separate administrative group. Which Spanning Tree Protocol should be used to support the design requirements?

 

A.

IEEE 802.1w

B.

IEEE 802.1D

C.

IEEE 802.1s

D.

IEEE 802.1p

 

Correct Answer: C

 

 

QUESTION 85

A company wants a design that would support OSPF through a service provider ATM network. Which two OSPF network types should the designer use to establish OSPF neighborship between OSPF routers through the ATM network? (Choose two.)

 

A.

A broadcast network will always work through ATM networks.

B.

A broadcast network will work when the broadcast support is explicitly configured at the ATM network.

C.

Explicit neighbor statements are required when a nonbroadcast network is configured.

D.

Explicit neighbor statements are required when a point-to-multipoint network is configured.

E.

A nonbroadcast network does not require DR selection.

 

Correct Answer: BC

 

 

QUESTION 86

Which restriction prevents a designer from using a GDOI-based VPN to secure traffic that traverses the Internet?

 

A.

Enterprise host IP addresses are typically not routable.

B.

GDOI is less secure than traditional IPsec.

C.

Network address translation functions interfere with tunnel header preservation.

D.

The use of public addresses is not supported with GDOI.

 

Correct Answer: C

 

 

QUESTION 87

A large enterprise customer is migrating thousands of retail offices from legacy TDM circuits to an Ethernet-based service. The network is running OSPF and has been stable for many years. It is now possible to backhaul the circuits directly to the data centers, bypassing the regional aggregation routers. Which two networking issues need to be addressed to ensure stability with the new design? (Choose two.)

 

The size of the link-state database will increase significantly.

A.

Nothing will change if the number of offices is the same.

B.

Nothing will change if the number of physical interfaces stays the same.

C.

The RIB will increase significantly.

D.

The FIB will increase significantly.

E.

The amount of LSA flooding will increase significantly.

F.

 

Correct Answer: EF

 

 

QUESTION 88

You are tasked with implementing a 1000-phone remote access solution, where phones will traverse a WAN edge router. Assuming all of the following features are supported in a hardware-assisted manner, which of the following will have the most detrimental impact on the delay of the packet?

 

A.

encryption

B.

stateful firewall

C.

MPLS encapsulation

D.

GRE encapsulation

 

Correct Answer: A

 

 

 

QUESTION 89

Which three techniques can be used to improve fault isolation in an enterprise network design? (Choose three.)

 

A.

aggregate routing information on an OSPF ABR

B.

fully meshed distribution layer

C.

Equal-Cost Multipath routing

D.

EIGRP query boundaries

E.

multiple IS-IS flooding domains

F.

tuned Spanning Tree Protocol timers

 

Correct Answer: ADE

 

 

QUESTION 90

You work as a network designer for a company that is replacing their Frame Relay WAN with an MPLS VPN service, where the PE-to-CE routing protocol is BGP. The company has 3000 routes in their distribution routers, and they would like to advertise their access routers through the MPLS network. Their service provider, however, only supports 1000 prefixes per VRF. Which two design solutions can be applied to ensure that your access routers will be able to reach all devices in your network? (Choose two.)

 

A.

Use prefix lists on your distribution routers to control which routes are sent to the MPLS network.

B.

On your distribution routers, configure null routes and aggregate routes for the prefixes in your network.

C.

Configure your distribution routers to send a default route to the MPLS network.

D.

Summarize the routes on the MPLS WAN interfaces of your distribution routers.

 

Correct Answer: BC

 

Free VCE & PDF File for Cisco 352-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

This entry was posted in 352-001 Real Tests (July) and tagged , , , , , , . Bookmark the permalink.