Download New Updated (June) VMWare VCAN610 Practice Test 71-80

Ensurepass

 

 

QUESTION 71

Which components are required to enable layer 2 bridging? (Choose two.)

 

A.

Distributed firewall rule to allow layer 2 traffic in the bridge.

B.

Deployed Logical Switch.

C.

Deployed Logical Router.

 

 

 

VMware VCAN610 : Practice Test

D.

VLAN trunk configured on logical switch.

 

Answer: AC

 

 

QUESTION 72

What is the frequency of the heartbeat between the active and standby NSX Edge instances when configured for HA?

 

A.

Every 1 second.

B.

Every 2 seconds.

C.

Every 5 seconds.

D.

Every 15 seconds.

 

Answer: A

 

 

QUESTION 73 – Exhibit ?

 

clip_image002

 – Exhibit —

 

An NSX administrator has deployed the network shown in the diagram:

 

Based on the diagram, which statement describes a valid method for redirecting traffic around the fault?

 

 

 

VMware VCAN610 : Practice Test

 

A.

Building this topology using a layer 2 switched fabric with connectivity between the leafs would allow traffic to be redirected around the fault to another leaf.

B.

Building this topolo

gy using a layer 3 routed fabric with connectivity between the leafs would allow traffic to be redirected around the fault to another leaf.

C.

Building this topology using a layer 2 switched fabric with spanning tree will provide the quickest path around the fault to another spine when connectivity is lost.

D.

Building this topology using a layer 3 routed fabric will provide the quickest path around the fault to another spine when connectivity is lost.

 

Answer: D

 

 

QUESTION 74

A vSphere administrator wants to setup an NSX Edge Service Gateway to provide traveling employees secure access to company servers located in specific network segments within the corporate Data Centers. The solution has to be as scalable as possible.

 

Which Virtual Private Network solution will satisfy the administrator’s requirements?

 

A.

SSL VPN

B.

MPLS VPN

C.

Layer 2 VPN

D.

IPSec VPN

 

Answer: A

 

 

QUESTION 75

Which two are valid statements regarding third-party services and NSX? (Choose two.)

 

A.

Third party services are automatically registered with NSX Manager.

B.

Third party services can either be automatically or manually registered with NSX Manager.

C.

Third party services require the deployment of a virtual appliance.

D.

Third party services may or may not utilize a service virtual appliance.

 

Answer: BD

VMware VCAN610 : Practice Test

 

 

QUESTION 76

What is the function of NSX Data Security?

 

A.

Prevents sensitive data in your virtualized environment from being copied

B.

Prevents sensitive data in your virtualized environment from being modified

C.

Identifies sensitive data in your virtualized environment based upon regulation security policies

D.

Identifies sensitive data in your virtualized environment based upon regulation violation reports

 

Answer: D

 

 

QUESTION 77 – Exhibit ?

 

clip_image004

 – Exhibit —

 

Your data center clusters are configured as shown in the exhibit:

 

Core0 uses Virtual SAN and hosts virtual machines running the following components:

 

vCenter Server

Single Sign-On Server

Update Manager

 

 

 

VMware VCAN610 : Practice Test

SQL Server database

 

Core1, Core2, and Core3 use a single Fibre Channel attached storage array. Core1 hosts over 500 virtual machines. Core2 hosts over 400 virtual machines. Core3 hosts 100 virtual machines.

 

Following VMware’s best practices, NSX Controller components should be deployed to which location(s)?

 

A.

Deploy three NSX Controllers, one on each host of Core0.

B.

Deploy four NSX controllers, one on each cluster in the data center.

C.

Deploy 27 NSX controllers, one for each host in the data center.

D.

Deploy three NSX controllers. Deploy one in Core1, one in Core2, and one in Core3.

 

Answer: A

 

 

QUESTION 78

A vSphere administrator deploys the NSX Edge Load Balancer in Inline mode. Which is not a requirement for the Load Balancer to operate correctly?

 

A.

Perform Source NAT on the traffic from the clients.

B.

Connect the Load Balancer directly to the same subnet as the VMs that are part of the Server Pool.

C.

Perform Destination NAT on the traffic from the clients.

D.

Point the virtual machines in the Server Pool to the Load Balancer as their default gateway.

 

Answer: A

 

 

QUESTION 79

An administrator manages a TFTP server virtual machine that is connected to a Logical Switch with a VNI of 7321. The TFTP server has been configured to use port 1069. An NSX Edge Service Gateway is connected to VNI 7321 and has an uplink interface with access to the physical network. Assume external users can reach the Service Gateway.

 

 

 

VMware VCAN610 : Practice Test

 

What should the administrator configure to ensure external connections to the TFTP server are successful?

 

A.

Create a DNAT rule with the original port of 69 and translated port of 1069.

B.

Create a SNAT rule with the original port of 1069 and translated port of 69.

C.

Create a SNAT rule with the original port of 69 and translated port of 1069.

D.

Create a DNAT rule with the original port of 1069 and translated port of 69.

 

Answer: A

 

 

QUESTION 80

A NSX administrator attempts to create a Logical Switch, but assigns it a name of an existing Logical Switch. What will be the result?

 

A.

The Logical Switch is created with the name assigned by the NSX Administrator.

B.

NSX Manager will append a two digit number to the Logical Switch name, starting with

Q3

 

 

 

A.The Logical Switch can’t be attached to a Redistributed Router until it’s name is changed.

 

B.An error message is displayeD. Unable to allocate an available resource.

 

Answer: A

 

Free VCE & PDF File for VMWare VCAN610 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in VCAN610 Practice Tests (June) and tagged , , , , , , . Bookmark the permalink.