Download New Updated (June) VMWare VCPN610 Practice Test 111-120

Ensurepass

 

QUESTION 111

In a data center using a leaf and spine architecture, which two statements define the connectivity between the leaf and spine tiers required to provide optimal network connectivity for NSX? (Choose two.)

 

A.

Links are required between leaf and spine switches, and from each spine switch to other spine switches in the architecture.

 

 

 

VMware VCPN610 : Practice Test

B.

Links are required between leaf and spine switches in the architecture to form a point-to- point connection between the two tiers.

C.

High availalability and scalability should be achieved using NSX High Availability.

D.

High availability and scalability should be achieved using Equal Cost Multipathing (ECMP).

 

Answer: BD

 

 

QUESTION 112

A company wants to deploy VMware NSX for vSphere and ensure the least amount of bandwidth consumption in the underlying physical architecture. Which replication mode should the logical switchesbe deployed with?

 

A.

Multicast Replication Mode

B.

Unicast Replication Mode

C.

Hybrid Replication Mode

D.

vSphere Replication Mode

 

Answer: A

 

 

QUESTION 113

Which is not a prerequisite to upgrade vCloud Network and Security Virtual Wires to Logical Switches?

 

A.

vCloud Network and Security Manager has been upgraded to NSX Manager.

B.

vShield Data Security has been uninstalled.

C.

NSX Controllers have been deployed.

D.

The NSX Manager has been configured with the same IP as the vCloud Network and Security Manager.

 

Answer: C

 

 

QUESTION 114

Which two statements are true regarding NSX High Availability? (Choose two.)

 

 

 

VMware VCPN610 : Practice Test

 

A.

NSX HA is configured as Active-Active.

B.

NSX HA is configured as Active-Standby.

C.

If an Active node fails, there is no service interruption during failover.

D.

If an Active node fails, there is a 15 second service interruption during failover.

 

Answer: BC

 

 

QUESTION 115

What is a requirement of the physical network for VXLAN to operate correctly when deploying NSX for vSphere?

 

A.

Configure Jumbo Frames.

B.

Configure PIM in Sparse or Dense mode.

C.

Multichassis Link Aggregation (MLAG) on the Top of Rack switches.

D.

IPv4 enabled in the local segment where the VTEPs are connected.

 

Answer: A

 

 

QUESTION 116

What is the frequency of the heartbeat between the active and standby NSX Edge instances when configured for HA?

 

A.

Every 1 second.

B.

Every 2 seconds.

C.

Every 5 seconds.

D.

Every 15 seconds.

 

Answer: A

 

 

QUESTION 117 – Exhibit?

 

 

 

VMware VCPN610 : Practice Test

 

clip_image002

 – Exhibit —

 

An NSX administrator creates the NSX network in the exhibit:

 

What destination IP address will Host-A use when sending a VXLAN frame to Host-B?

 

A.

The IP address of one of Host-B’s new vmkernel ports created during host configuration.

B.

The IP address of Host-B’s management vmkernel port, which is also the VTEP IP address.

C.

< font style="font-size: 10pt" color="#000000">The IP address of Host-B’s NSX Controller. The NSX Controller forwards the VXLAN frame to Host-B.

D.

The IP address Host-B provided to Host-A during VXLAN tunnel setup negotiations.

 

 

 

VMware VCPN610 : Practice Test

 

Answer: A

 

 

QUESTION 118

Which two NSX Data Security roles could be assigned to view configured policies and violation reports? (Choose two.)

 

A.

Security Administrator

B.

NSX Administrator

C.

Auditor

D.

Enterprise Administrator

 

Answer: AC

 

 

QUESTION 119

On a vSS, how does teaming two or more physical network adapters provide load balancing when using the Load Balancing feature Route based on the originating virtual port ID?

 

A.

They physical network adapter is chosen by use of a round robin based algorithm for each additional virtual port in the port group that becomes active.

B.

The physical network adapter is chosen by using the source IP address of the virtual machine and the destination IP address as variables in an algorithm.

C.

The physical network adapter is chosen by using the source MAC address as a variable in an algorithm.

D.

The physical network adapter is chosen based on the workloads from each port and the number of physical adapters.

 

Answer: A

 

 

QUESTION 120

Which statement describes proper packet processing of layer 3 traffic in an NSX for vSphere topology?

 

A.

All packets are processed by the distributed router. No packets are processed by the

 

 

 

VMware VCPN610 : Practice Test

Logical Router Control VM.

B.

Only packets requiring routing to another VM on the same host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.

C.

Only packets requiring routing to another VM on a different host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.

D.

All packets requiring routing are processed by performing a lookup in the Logical Router Control VM and then forwarded.

 

Answer: A

 

Free VCE & PDF File for VMWare VCPN610 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in VCPN610 Practice Tests (June) and tagged , , , , , , . Bookmark the permalink.