[Free] 2018(Jan) EnsurePass Dumpsleader Juniper JN0-343 Dumps with VCE and PDF 381-390

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Juniper Official New Released JN0-343
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/JN0-343.html

Juniper Networks Certified Internet Specialist (JNCIS-ENT)

Question No: 381 – (Topic 4)

You need to prevent people outside the 192.168.1.0/24 network from accessing your Junos device using FTP.

Which configuration, when applied to interface lo0.0, will provide the desired result?

  1. firewall { family inet {

    filter protect-host { term limit-ftp { from {

    source-address { 192.168.1.0/24 except;

    0.0.0.0/0;

    }

    port ftp;

    }

    then discard;

    }

    }

    }

    }

  2. firewall { family inet {

    filter protect-host { term limit-ftp { from {

    source-address { 192.168.1.0/24 except;

    0.0.0.0/0;

    }

    protocol tcp; port ftp;

    }

    then discard;

    }

    term all-else { then accept;

    }

    }

    }

    }

  3. firewall { family inet {

    filter protect-host { term limit-ftp { from {

    source-address { 192.168.1.0/24;

    }

    port ftp;

    }

    then discard;

    }

    }

    }

    }

  4. firewall { family inet {

filter protect-host { term limit-ftp { from {

source-address { 192.168.1.0/24;

}

protocol tcp; port ftp;

}

then discard;

}

term all-else { then accept;

}

}

}

}

Answer: B

Question No: 382 – (Topic 4)

Ensurepass 2018 PDF and VCE

All OSPF routers shown in the exhibit booted at the same time, and the network has stabilized.

How many adjacencies does R1 have?

  1. 0

  2. 1

  3. 2

  4. 3

Answer: C

Question No: 383 – (Topic 4)

You have implemented per-packet load balancing.

Which command would you use to verify that the load balancing is active?

  1. show route | match load-balancing

  2. show route | display forwarding-table

  3. show route load-balancing

  4. show route forwarding-table

Answer: D

Question No: 384 – (Topic 4)

Ensurepass 2018 PDF and VCE

Referring to the exhibit, you want to avoid using STP and the LAG is configured on ae0. Which function would you use to prevent a Layer 2 loop?

  1. VRRP

  2. RTG

  3. LACP

  4. GRES

Answer: B

Question No: 385 – (Topic 4)

Ensurepass 2018 PDF and VCE

Your current network is using Switch-1 and Switch-2 as a Layer 3 core pair. You change the EX series switch core into a VC and configure the links between the switches to be a LAG.

Assuming that Switch-3 is operating at Layer 2 only, which two protocols would be removed from this portion of the network? (Choose two.)

  1. GRES

  2. BFD

  3. VRRP

  4. STP

Answer: C,D

Question No: 386 – (Topic 4)

A company has four routers connected as follows: PEER — (A – B – C – D)

Router A has an external BGP peer. IBGP peering sessions exist between A-B, B-C, C-D, and A-D. The company is running an IGP for all internal segments and does not use static

routes. Router D cannot use BGP paths from Router A in its routing table. What are two reasons why this is occurring? (Choose two.)

  1. The routes have an unreachable next-hop address.

  2. BGP synchronization is disabled by default.

  3. Router A is not configured to use next-hop self.

  4. The TTL exceeds 1, preventing BGP routing updates from being sent between Router A and Router D.

Answer: A,C

Question No: 387 – (Topic 4)

Which statement describes a routing instance on a Junos device?

  1. A routing instance provides separation of processing resources.

  2. A routing instance provides control plane separation.

  3. A routing instance virtualizes a Junos-based device, enabling it to run multiple copies of the Junos OS on the same system.

  4. A routing instance is a unique collection of routing tables, interfaces, and routing protocol parameters.

Answer: D

Question No: 388 – (Topic 4)

– Exhibit – routing-options {

router-id 10.10.1.2;

}

policy-options {

policy-statement loadbalance {

term 1 { from {

route-filter 100.100.0.0/16 exact;

}

then {

load-balance per-packet;

}

}

}

}

– Exhibit –

Referring to the exhibit, you have configured a load balancing policy and the router has an equal cost path for traffic to 10.100.0.0/16.

What must you do to complete the load balancing configuration?

  1. Apply the policy as an export policy under the [edit forwarding-options] hierarchy.

  2. Apply the policy as an import policy under the [edit forwarding-options] hierarchy.

  3. Apply the policy as an export policy under the [edit routing-options forwarding-table] hierarchy.

  4. Apply the policy as an import policy under the [edit routing-options forwarding-table] hierarchy.

Answer: C

Question No: 389 – (Topic 4)

Ensurepass 2018 PDF and VCE

Referring to the exhibit, R1, R2, and R3 boot at the same time. Several minutes later, R4 boots.

After R4 has been online for 40 seconds, which router will be the OSPF designated router?

  1. R1

  2. R2

  3. R3

  4. R4

Answer: B

Question No: 390 – (Topic 4)

Which two put ge-0/0/0 and ge-0/0/1 into the VLAN data? (Choose two.)

  1. set interfaces interface-range data-ports member ge-0/0/0 set interfaces interface-range data-ports member ge-0/0/1

    set interfaces interface-range data-ports unit 0 family ethernet-switching vlan members data

  2. set interfaces ge-0/0/0-1 unit 0 family ethernet-switching vlan members data

  3. set interfaces ge-0/0/0 to ge-0/0/1 unit 0 family ethernet-switching vlan members data

  4. set interfaces ge-0/0/0 unit 0 family ethernet-switching vlan members data set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members data

Answer: A,D

100% Ensurepass Free Download!
Download Free Demo:JN0-343 Demo PDF
100% Ensurepass Free Guaranteed!
JN0-343 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

This entry was posted in JN0-343 Latest Exam (Jan 2018) and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.