[Free] 2018(Jan) EnsurePass Examcollection Juniper JN0-692 Dumps with VCE and PDF 91-100

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Juniper Official New Released JN0-692
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/JN0-692.html

Service Provider Routing and Switching Support, Professional

Question No: 91 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

In the exhibit, all routers within each AS are configured for Anycast RP. All intra-AS routers are configured within the same MSDP mesh group. Inter-AS multicast has been enabled using MSDP without MSDP mesh groups. Which statement is true?

  1. The AS border routers allow TCP port 636 in their infrastructure ACLs.

  2. Duplicate SA messages may be received in AS2.

  3. SA messages from R5, R7, or R8 are not forwarded to AS1.

  4. Inter-AS MSDP peerings must be configured on the AS border routers.

Answer: B

Question No: 92 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

Referring to the exhibit, which statement is true assuming BGP Layer 2 VPN signaling?

  1. PE1 receives two BGP NLRI updates, each containing a remote site ID, a label base, and Layer 2 encapsulation.

  2. PE2 receives one BGP NLRI update containing a remote site ID, a label base, and Layer 2 encapsulation.

  3. PE2 receives two BGP NLRI updates, each containing a remote site ID, label vc, and Layer 2 encapsulation.

  4. PE1 receives one BGP NLRI for VPN A containing only a remote site ID and a label offset value.

Answer: A

Question No: 93 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

Customer A is complaining that routes advertised from the CE2 router are not being received on the CE1 router. The physical topology of the network is CE1-PE1-PE2-CE2. The CE1-PE1 subnet is 172.16.1.0/24. The CE2-PE2 subnet is 172.16.2.0/24. PE1#39;s loopback is 192.168.3.1 and PE2#39;s loopback is 192.168.4.1.Referring to the output in the exhibit, what is the problem?

  1. No LSP exists between PE1 and PE2.

  2. Route targets are not properly configured.

  3. as-override is not configured in the VRFs.

  4. family inet-vpn is not configured on the PEs.

Answer: B

Question No: 94 – (Topic 2)

What does the Junos command advertise-inactive allow?

  1. OSPF inactive routes to be advertised using BGP

  2. inactive and hidden BGP routes to be redistributed into OSPF

  3. the best BGP route to be re-advertised by BGP, even when it is not the best route

  4. the second-best BGP route to be re-advertised by BGP, to back up the best BGP route

Answer: C

Question No: 95 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

The IGP is IS-IS. R2 has configured its loopback interface in Level 2 only. Referring to the exhibit, which statement is true?

  1. R2 advertises its loopback address to all L1 adjacencies.

  2. R1 cannot reach R2#39;s loopback address.

  3. R1 uses a default route to reach R2#39;s loopback address.

  4. R1 automatically selects R2 as the default gateway to reach R2#39;s loopback address.

Answer: C

Question No: 96 – (Topic 2)

An IS-IS level 1-only router is configured within a larger multilevel hierarchy. Which OSPF area type resembles the routing information in the L1 router#39;s table?

  1. OSPF default area

  2. OSPF stub area

  3. OSPF NSSA

  4. OSPF NSSA with no summaries

Answer: D

Question No: 97 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

In the exhibit, all routers within each AS are configured for Anycast RP. All intra-AS routers are configured within the same MSDP mesh group. Inter-AS multicast has been enabled using MSDP without MSDP mesh groups. Which statement is true?

  1. R6 and R7 should have an MSDP peering, because multiple MSDP AS hops are not allowed.

  2. SA messages received from R2 are not forwarded to R5, R7, and R8.

  3. SA messages from R5 are not forwarded to AS1.

  4. Duplicate SA messages may be received in AS2.

Answer: D

Question No: 98 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

In the exhibit, NG-MVPN is used for a Layer 3 VPN. Which two statements are valid? (Choose two.)

  1. The egress PEs for I-PMSI tunnels should signal a label value of 3.

  2. The vrf-table-label parameter is configured on the PEs.

  3. PIM must be enabled on the PE and P routers.

  4. The provider tunnel shown is similar to a draft-Rosen default MDT.

Answer: B,D

Question No: 99 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

Traffic is flowing through the policer as shown in the exhibit. The traffic has a throughput rate of 3 Mbps, and the burst size counter is at 1.5 MB. How is traffic affected?

  1. Traffic has its PLP set to low.

  2. Traffic has its PLP set to medium-low.

  3. Traffic has its PLP set to medium-high.

  4. Traffic has its PLP set to high.

Answer: C

Question No: 100 – (Topic 2)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

You manage an MX series router (with 100 ms buffer size per port) that includes the configuration shown in the exhibit. Traffic marked with DSCP 000101 is entering the ge- 1/0/4 interface at 102 Mbps. The traffic exits the device on the ge-1/0/5 interface. There is no other traffic transiting the router. What happens to traffic exceeding 100 Mbps?

  1. Traffic exceeding 100 Mbps is forwarded.

  2. Traffic exceeding 100 Mbps is buffered.

  3. Traffic exceeding 100 Mbps is redirected to a rate limiter.

  4. Traffic exceeding 100 Mbps is dropped.

Answer: D

100% Ensurepass Free Download!
Download Free Demo:JN0-692 Demo PDF
100% Ensurepass Free Guaranteed!
JN0-692 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

This entry was posted in JN0-692 Latest Exam (Jan 2018) and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.