[Free] Download New Latest (November) Juniper JN0-201 Actual Tests Topic 0 part 01

Ensurepass

QUESTION 1  (Topic 0)

 

From within the [edit] portion of the configuration, which command restores the number 2 rollback file?

 

A.

rollback 2

B.

run rollback 2

C.

request system rollback 2

D.

run request system rollback 2

 

Answer: A

 

 

QUESTION 2  (Topic 0)

 

In normal operation, what is the job of the penultimate router?

 

A.

It pops the label and sends the remaining data packet to the egress router.

B.

It pushes an additional label on a packet and sends it to the egress router.

C.

It swaps an incoming label with a label of 3 and sends it to the egress router.

D.

It examines the IP packet and forwards the packet based on the destination IP address.

 

Answer: A

 

 

QUESTION 3  (Topic 0)

 

Which command ensures that a configuration file on a backup Routing Engine is identical to the file on the primary Routing Engine?

 

A.

commit check

B.

commit and-quit

C.

commit confirmed

D.

commit synchronize

 

Answer: D

 

 

QUESTION 4  (Topi
c 0)

 

 

 

 

By default, which command can be used to display information about packets that have been logged with the syslog firewall filter action?

 

A.

show log

B.

show firewall

C.

show log messages

D.

show firewall log

 

Answer: C

 

 

QUESTION 5  (Topic 0)

 

A network administrator would like to verify the active alarms on interface so-0/0/0.0. Which command displays this information?

 

A.

show alarms

B.

show interfaces terse

C.

show alarms extensive

D.

show interfaces extensive

 

Answer: D

 

 

QUESTION 6  (Topic 0)

 

What are two purposes of the AS_PATH attribute? (Choose two.)

 

A.

route selection

B.

loop avoidance

C.

determining equal cost paths for reachablilty

D.

defining the application of other BGP attributes

 

Answer: AB

 

 

QUESTION 7  (Topic 0)

 

If there is a BGP next hop with equal preference in inet.0 and inet.3, which version of the route will BGP use?

 

A.

the route in inet.3

B.

the route in inet.0

 

 

 

 

C.

the route with the lower metric

D.

It will randomly choose between inet.0 and inet.3.

 

Answer: A

 

 

QUESTION 8  (Topic 0)

 

What are three characteristics of RIP? (Choose three.)

 

A.

uses Bellman-Ford algorithm

B.

uses hop count as the metric

C.

supports maximum allowable hop count of 15

D.

floods updates to all RIP routers in the network

E.

sends updates only when a route metric changes

 

Answer: ABC

 

 

QUESTION 9  (Topic 0)

 

Which ASIC is responsible for segmenting a packet into 64-byte J-Cells?

 

A.

PIC I/O ASIC

B.

I/O Manager ASIC

C.

Buffer Manager ASIC

D.

Internet Processor ASIC

 

Answer: B

 

 

QUESTION 10  (Topic 0)

 

Assume that a comparable configuration is applied to your peer in AS 11 and that bi- directional TCP reachability has been achieved. Which EBGP configuration will allow the BGP session to become established?

 

A.

routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external; neighbor 10.0.3.6 { peer-as 11; } } }

B.

routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external; peer-as 11;{ neighbor 10.0.3.6; } }

C.

routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 {

 

 

 

 

type external; peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer- as 64;{ neighbor 10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } } neighbor 10.0.3.6; } }

D.

routing-options { }

E.

routing-options { autonomous-system 64; }

F.

routing-options { autonomous-system 64; }

G.

routing-options { autonomous-system 64; } protocols {

H.

routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp { group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } } neighbor 10.0.3.6; } } } } }

 

Answer: A

 

Free VCE & PDF File for Juniper JN0-201 Actual Tests

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in JN0-201 Actual Tests (November) and tagged , , , , , , . Bookmark the permalink.