[Free] Download New Latest (November) Juniper JN0-692 Actual Tests Topic 1, Volume A part 04

Ensurepass

QUESTION 31  (Topic 1)

 

 

 

 

 

clip_image002

 

PE-1 is not sending any routes to the CE router in the Cust routing instance.

 

What is the reason?

 

A.

There is a mismatch in the target community and the route distinguisher.

B.

The vrf-import policy is only accepting direct routes.

C.

The as override parameter is causing an AS loop on the CE device.

D.

The vrf-export policy must be explicitly defined.

 

Answer: B

 

 

QUESTION 32  (Topic 1)

 

Which two statements correctly describe BGP operation? (Choose two.)

 

 

 

 

 

A.

IBGP does not advertise routes learned from other IBGP neighbors.

B.

IBGP advertises routes learned from other IBGP neighbors.

C.

EBGP advertises routes learned from other IBGP or EBGP neighbors.

D.

EBGP does not advertise routes learned from other EBGP neighbors.

 

Answer: AC

 

 

QUESTION 33  (Topic 1)

 

Click the Exhibit button.

 

clip_image004

 

In the exhibit, Area 1 and Area 2 are configured as not-so-stubby areas. RIP network 192.168.100.0/24 is redistributed into OSPF in Area 1.Which three statements are true? (Choose three.)

 

A.

Network 192.168.100.0/24 is advertised in a Type 7 LSA in Area 1.

B.

Network 192.168.100.0/24 is advertised in a Type 7 LSA in Area 0.

C.

Network 192.168.100.0/24 is advertised in a Type 5 LSA in Area 0.

D.

The area border router between Area 0 and Area 2 converts network 192.168.100.0/24 to a Type 7 LSA.

E.

Area 2 does not see the network 192.168.100.0/24 in its link-state database.

 

Answer: ACE

 

 

QUESTION 34  (Topic 1)

 

 

 

 

Click the Exhibit button.

 

clip_image006

 

R3 and R4 want to establish an EBGP session between each other’s loopback addresses. They have each configured static routes to the other’s loopback address and can ping from loopback to loopback. Their EBGP session is configured with correct neighbor and local addresses. The correct AS numbers have been specified at the [routing-options] hierarchy as well. Considering the topology in the exhibit, which statement is true?

 

A.

BGP’s protocol preference must be adjusted to be lower than protocol static for the session to establish.

B.

Each side must configure multipath for the session to establish.

C.

Each peer must specify a local-as within their EBGP configuration for the session to establish.

D.

Each peer must configure multihop for the session to establish.

 

Answer: D

 

 

QUESTION 35  (Topic 1)

 

Click the Exhibit button.

 

 

 

 

 

clip_image008

 

CE1, CE2, and CE3 are part of a single VPLS VPN. R1, R2, and R3 are PEs in the provider network, and have just been powered on. The VPLS domain has converged, and frames have passed between all CEs in the last minute. An Ethernet frame has just arrived at R3 from CE3. It has a source MAC address of CE3 and a destination MAC address of CE1.What does R3 do with the Ethernet frame?

 

A.

Drops
the packet as the destination MAC address is not for R3.

B.

Drops the packet as the destination MAC address is not in R3’s MAC table.

C.

Forwards the packet to R1 only.

D.

Forwards the packet to R1 and R2.

 

Answer: C

 

 

QUESTION 36  (Topic 1)

 

Click the Exhibit button.

 

 

 

 

 

clip_image010

 

You are the administrator of AS 65000. In the exhibit, there are four links between your network (AS 65000) and your upstream provider (AS 65001).

 

You have an export policy on all of your routers to advertise your routes such that:

 

Router A: MED 100, AS Path (65000), Origin 1

 

Router B: MED 100, AS Path (65000 65000), Origin 0

 

Router C: MED 50, AS Path (65000 65000), Origin 1

 

Router D: MED 50, AS Path (65000), Origin 0

 

Through which link will traffic from the Web server enter your network (AS 65000)?

 

A.

Router A

B.

Router B

C.

Router C

D.

Router D

 

Answer: D

 

 

 

 

 

QUESTION 37  (Topic 1)

 

You have applied a customized EXP rewrite rule on router R1 on the egress of the interface connecting to router R2. You want to verify if it is working properly. Which two methods would you use to accomplish this task? (Choose two.)

 

A.

Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets for the new EXP values with a firewall filter as they leave R2.

B.

Use the traceroute utility.

C.

Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.

D.

Use an input firewall filter on R2 that matches and counts on various EXP values on packets coming from R1.

 

Answer: CD

 

 

QUESTION 38  (Topic 1)

 

What is the purpose of the no-cspf command?

 

A.

to successfully signal the LSP across the network regardless of constraints

B.

to delete the CSPF database

C.

to ignore OSPF when calculating the ERO

D.

to successfully signal the LSP only if the default IGP path (or named path) meets all constraints

 

Answer: D

 

 

QUESTION 39  (Topic 1)

 

Click the Exhibit button.

 

 

 

 

 

clip_image012

 

R2 and R3 advertise a default route into Area 1.Based on the configurations in the exhibit, which statement is true? (Choose two.)

 

A.

Traffic from R1 to internal OSPF destinations in Area 0 will always transit R4.

B.

Traffic from R1 to internal OSPF destinations in Area 0 will always transit R2.

C.

Traffic from R1 to external OSPF destinations in Area 0 will always transit R2.

D.

Traffic from R1 to external OSPF destinations in Area 0 will always transit R4.

 

Answer: AC

 

 

QUESTION 40  (Topic 1)

 

Click the Exhibit button.

 

 

 

 

 

clip_image014

 

 

 

 

Traffic is flowing through the interfaces in the exhibit as follows:

 

On ge-0/0/2.0, IPv4 traffic has a throughput rate of 4 Mbps, and the burst size counter is at 200 KB.

 

On ge-0/0/2.0, IPv6 traffic has a throughput rate of 7 Mbps, and the burst size counter is at 550 KB.

 

On ge-0/0/3.0, IPv4 traffic has a throughput rate of 5 Mbps, and the burst size counter is at 250 KB.

 

On ge-0/0/3.1, IPv6 traffic has a throughput rate of 12 Mbps, and the burst size counter is at 450 KB.

 

Which statement describes what is happening?

 

A.

IPv6 traffic on ge-0/0.3.1 is being dropped; all other traffic is unaffected.

B.

IPv4 traffic on ge-0/0/2.0 is unaffected; IPv6 traffic on ge-0/0/2.0 is being dropped; IPv4 traffic on ge-0/0/3.0 is unaffected; IPv6 traffic on ge-0/0/3.1 is being dropped.

C.

IPv4 traffic on ge-0/0/2.0 is being dropped; IPv6 traffic on ge-0/0/2.0 is being dropped; IPv4 traffic on ge-0/0/3.0 is unaffected; IPv6 traffic on ge-0/0/3.1 is unaffected.

D.

All IPv4 and IPv6 traffic on ge-0/0/2 and ge-0/0/3 is being dropped.

 

Answer: B

 

Free VCE & PDF File for Juniper JN0-692 Actual Tests

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in JN0-692 Actual Tests (November) and tagged , , , , , , . Bookmark the permalink.