QUESTION 31
AAR is used to route which type of traffic?
A. |
Internal/Private Network |
B. |
External/Public Network |
C. |
Public Switched Telephone Network |
D. |
Internal and External Networks |
Answer: A
Reference:https://downloads.avaya.com/css/P8/documents/100014097(p. 42)
QUESTION 32
Which Call Coverage feature enables the call to be sent back to the originator?
A. |
Go To |
B. |
Send All Calls |
C. |
Consult |
D. |
Busy |
Answer: D
QUESTION 33
Changes that an administrator performs on a system are always only written to —- RAM.
Which SAT command must be used to copy these changes so that the hard disk, so that in case of a loss of power, the changes will be available?
A. |
Save —— |
B. |
Copy running configuration startup configuration |
C. |
Copy —— all
|
D. |
Save —— startup configuration |
Answer: A
QUESTION 34
To which two Communication Manager forms are FRLs assigned? (Choose two.)
A. |
COS |
B. |
COR |
C. |
Route Pattern |
D. |
Station |
Answer: BC
Reference:http://www.devconnectprogram.com/fileMedia/download/7dcc09d8-de00-484d- a5f7-20db2f627410
QUESTION 35
Administrative users are assigned a user profile that specifies both a web profile group and a SAT profile group. This controls the functions a user can perform with SAT and within the system Management Interface (SMI).
How does the SAT profile control the functions?
A. |
It controls the SAT “action” commands the user can use. |
B. |
It controls the time of day that the user can do Sat administration. |
C. |
It controls which SAT screens or categories the user can access. |
D. |
It controls the type of SAT access (GEDI or terminal emulation) the user can use. |
Answer: D
QUESTION 36
When creatingon administrator account, what is the setting In the user profile that allows
full access for all commands?
A. |
r- |
B. |
rm |
C. |
wm |
D. |
rx |
Answer: A
QUESTION 37
Through which Communication Manager interface do you add an H.248 gateway to CM?
A. |
System Access Terminal (SAT) |
B. |
System Management Interface (SMI) |
C. |
System Platform Management Console |
D. |
Linux command line |
Answer: B
Reference:http://downloa
ds.avaya.com/css/P8/documents/100059391(page 18)
QUESTION 38
Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?
A. |
Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `n’. |
B. |
Terminal Trans. Init.? Y, TTI state = `data’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `y’. |
C. |
Terminal Trans. Init.? Y, TTI state = `vdata’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `n’. |
D. |
Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `y’. |
Answer: D
QUESTION 39
You must set the calling privileges for a user so that the user can make calls but not receive calls. You assign COR5to the user’s station.
What other settings must be completed?
A. |
In COR 5, set calling party restriction = `origination’ and called party restriction = `none’ |
B. |
In COR 5, set calling party restriction = `outward’ and called party restriction = `termination’ |
C. |
In COR 5, set calling party restriction = `origination’ and called party restriction = `termination’ |
D. |
In COR 5, set calling party restriction = `none’ and called party restrictions = `termination’ |
Answer: D
QUESTION 40
The station lock feature manually or automatically changes the COR of a station to block outgoing calls recently, extensions at a customer’s site have been used for out of hours outgoing calls. IT would like to activate this feature automatically on the telephone on site.
To address safety concerns, what do you tell the site manager regarding outgoing emergency calls and incoming or outgoing calls if staff needs to work overtime?
A. |
The station lock feature does not block incoming calls and using a code they can make emergency or outgoing calls. |
B. |
The station lock features does not block outgoing emergency calls and using a code they can receive incoming calls and make outgoing calls. |
C. |
The station lock feature does not block incoming calls or emergency outgoing calls and the telephone can be unlocked from designated telephone(s) by inputting a code. |
D. |
The station lock feature does not block incoming calls or emergency outgoing calls and the telephone can be unlocked by inputting a code. |
Answer: D
Free VCE & PDF File for Avaya 3100 Real Exam
Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …
100-105 Dumps VCE PDF
200-105 Dumps VCE PDF
300-101 Dumps VCE PDF
300-115 Dumps VCE PDF
300-135 Dumps VCE PDF
300-320 Dumps VCE PDF
400-101 Dumps VCE PDF
640-911 Dumps VCE PDF
640-916 Dumps VCE PDF
70-410 Dumps VCE PDF
70-411 Dumps VCE PDF
70-412 Dumps VCE PDF
70-413 Dumps VCE PDF
70-414 Dumps VCE PDF
70-417 Dumps VCE PDF
70-461 Dumps VCE PDF
70-462 Dumps VCE PDF
70-463 Dumps VCE PDF
70-464 Dumps VCE PDF
70-465 Dumps VCE PDF
70-480 Dumps VCE PDF
70-483 Dumps VCE PDF
70-486 Dumps VCE PDF
70-487 Dumps VCE PDF
220-901 Dumps VCE PDF
220-902 Dumps VCE PDF
N10-006 Dumps VCE PDF
SY0-401 Dumps VCE PDF