[Free] New Updated (October) Avaya 3605 Real Exam Topic 1, Volume A part 04

Ensurepass

 

QUESTION 31  (Topic 1)

 

The IEEE 802.1aq virtualized service standard supports two modes of operation for the implementation of shortest path Bridging. Which mode is supported in the Avaya VENA Enterprise Fabric solution?

 

A.

Provider link state bridging (PLSB)

B.

Shortest Path Bridging Mac-In-Mac (SPBM)

C.

Shortest Path Bridging VID (SPBV)

 

 

 

 

D.

Shortest Path Bridging SID (SPBS)

 

Answer: C

 

 

QUESTION 32  (Topic 1)

 

A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing Ethernet Routing Switch (ERS) 8000-based core. The technician has to configure VRF on the ERS 8000. Which statement represents the order for configuring a new VRF?

 

A.

Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRF.

B.

Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF.

C.

Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF.

D.

Create a VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP address.

 

Answer: D

 

 

QUESTION 33  (Topic 1)

 

Refer to the exhibit.

 

clip_image001

 

When checking an Inter Switch Trunks (IST) configuration using the show mlt ist info command as shown in the exhibit, which IP address should be in the IP ADDRESS column?

 

A.

The IP address of the IST VLAN on the local switch.

B.

The IP address of the IST VLAN on the peer switch.

 

 

 

 

C.

The IP address of the first IST port on the peer switch.

D.

The management IP address of the peer switch.

 

Answer: B

 

 

QUESTION 34  (Topic 1)

 

The SNMP counters check for authorization failures and other types error conditions.

 

Which of these SNMP error conditions is displayed in Enterprise Device Manager?

 

A.

PCAP packet capture counters

B.

In Bad Community Names counters

C.

Fan Failure packet counters

D.

Power Supply Failure packet counters

 

Answer: D

 

 

QUESTION 35  (Topic 1)

 

When configuring link aggregation, a technician created a Distributed Multi-Link Trunk (DMLT) group on the Edge switch to the switch cluster core. What gets distributed?

 

A.

Access ports

B.

Discard Looped Frames

C.

Spanning Tree Enable

D.

LACP Enable

 

Answer: A

 

 

QUESTION 36  (Topic 1)

 

What is a characteristic of Routed Split Multi-Link Trunking (RSMLT) configuration?

 

A.

RSMLT is only configured on edge SMLT connections.

B.

RSMI T uses priority values to distinguish between the primary and backup routers.

C.

RSMLT routers are implemented with Virtual Routing Forwarding (VRF)-Lite routers.

 

 

 

 

D.

RSMLT is always used in conjunction with routing protocols and SMLT connections.

 

Answer: D

 

 

QUESTION 37  (Topic 1)

 

When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the attempt to load an ACLI configuration fails because the default interface is the CLI.

 

How is the ACLI interface obtained?

 

A.

Change the interface type in the config.cfg file.

B.

Change the ACLI boot flag and save the boot configuration file.

C.

Exit the CLI and choose ACLI at the interface manager prompt.

D.

Use the abort command and enter `no’ at the default interface.

 

Answer: C

 

 

QUESTION 38  (Topic 1)

 

A customer has security concerns with the current RADIUS authentication implementation and is asking to change all authentication requests from the ERS 8000 to be directed to their TACACS+ server.

 

What two differences exist between the authentication requests used by RADIUS and TACACS+ that would you cause this concern for the customer? (Choose two)

 

A.

TACACS+ is a TCP-based protocol.

B.

RADIUS does not support AES encryption.

C.

TACACS+ uses full packet encryption.

D.

RADIUS uses clear passwords.

 

Answer: AC

 

 

QUESTION 39  (Topic 1)

 

Consider the following port conditions on an Ethernet Routing Switch (ERS) 8648GTRS

 

 

 

 

10/100/1000 Ethernet I/O module:

 

Left LED ?green

 

Right LED ?flashing

 

What is the status of the port?

 

A.

The link speed is 100 Mbp, and the port is disabled.

B.

The link speed is 1000 Mbps, and the port is disabled.

C.

The link speed is 100 Mbps, and the port is passing traffic.

D.

The link speed is 1000 Mbps, and the port is passing traffic.

 

Answer: D

 

 

QUESTION 40  (Topic 1)

 

The ERS 8000 backplane hosts an EEPROM for storage of up to 4096 MAC addresses.

 

The MAC addresses are automatically used up as they are assigned to which three of the following?

 

A.

Switch physical ports

B.

Multi-Link Trunking ports.

C.

Multi-Link Trunking groups.

D.

IPX interfaces.

E.

VLANs.

 

Answer: ACE

Free VCE & PDF File for Avaya 3605 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 3605 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.