[Free] New Updated (October) Avaya 3605 Real Exam Topic 2, Volume B part 01

Ensurepass

 

Topic 2, Volume B

 

 

QUESTION 71  (Topic 2)

 

The trace level 9 3 command accomplish?

 

A.

It captures BGP events at a terse level.

B.

It captures packets copied to the CPU at a verbose level.

C.

It shows CPU utilization.

D.

It captures RCC IP events at verbose level.

 

Answer: B

 

 

 

QUESTION 72  (Topic 2)

 

What is the maximum number of Gigabit Ethernet ports on a single Ethernet Routing Switch (ERS) 8300 Input/Output module?

 

A.

16

B.

24

C.

48

D.

50

 

Answer: C

 

 

QUESTION 73  (Topic 2)

 

An Information Technology organization needs to determine whether they should upgrade their existing Routing Switch (ERS) 8600 switches to release 5.0. Each chassis currently has both 8648GTR 8648TX modules. One of the features that the company requires is the ability to perform port mirroring on multiple ports per module at a time.

 

What should be done to meet their port mirroring requirement when upgrading to software release 5.0?

 

A.

Replace the existing modules with 8648GTRS modules,

B.

Upgrade to ERS 8600 Release 5.0 without any hardware upgrade.

C.

Replace the existing 8648TX modules with ERS 8648TXE for egress mirroring.

D.

Recommend other means to capturing traffic.

 

Answer: A

 

 

QUESTION 74  (Topic 2)

 

IPFIX is protocol used for the export of flow information from traffic observed on a switch. Which true for the functioning of the IPIX protocol? (Choose two.)

 

A.

The IPFIX exporter handles sending packets to the collectors.

B.

There is a command for exporting and flushing.

C.

The IPFIX information cannot be exported to a 3rd-party application.

D.

The exporter can support up to 6 collectors

 

 

 

 

 

Answer: AB

 

 

QUESTION 75  (Topic 2)

 

Which statement describe step in provisioning SPBM in an Enterprise network?

 

A.

IP addresses on the core links.

B.

Enable SPBM and IS -IS globally on all nodes and on the core facing links.

C.

Configure the MAC table.

D.

Configure L2 and L3 VSNs on the core SPBM nodes.

 

Answer: B

 

 

QUESTION 76  (Topic 2)

 

While configuring packet capture Tool (PCAP), an Ethernet Routing Switch (ERS) 8600 switch has generated the following log:

 

pcapAllocateBuffer: malloc(96 Mbs) failed

 

Which event could have caused this log, and which course of action resolves the issue?

 

A.

The memory allocation failed to wrap. Set Pcmcia Wrap to true

B.

The packet capturing stopped. Enable the Buffer-wrap or reset the stats.

C.

The length of the IP frame is too long to capture. Turn on fragmentation

D.

There is not enough available memory for PCAP. Try with a lower value of buffer-size.

 

Answer: D

 

 

QUESTION 77  (Topic 2)

 

Virtual forwarding eliminates the need for multiple physical routers.

 

What is the difference in the Virtual Routing forwarding (VRF)-Lite configuration from Ethernet Routing switches (ERS) 8600/8800 to ERSS300?

 

 

 

 

 

A.

8300 supports 250 virtual routers; ERS 8600/8800 supports 256.

B.

On ERS 8600/8800, VRF-Lite virtualizes the control and data plane as well as the routing tables.

C.

ERS 8300 supports Inter-VRF routing policies

D.

ERS 8600/8800 supports inter-VRF routing policies.

 

Answer: D

 

 

QUESTION 78  (Topic 2)

 

Config mlt 1 create name “MLT to Core”

 

Config rmlt 1 add ports 3/8, 4/8

 

Config mlt 1 add vlan 1

 

Config mlt 1 perform-tagging enable

 

ho mlt info 1

 

To add more links to this MLT setup at a later date, what needs to be provisioned?

 

A.

Create a new VLAN and add the new VLAN to the MLT.

B.

More ports cannot be added because only a total of two can be aggregated to the core device.

C.

once the MLT is enabled and working, more ports cannot be added to the link aggregation

D.

Associate the new ports to the same settings as the current MLT ports; then add them to the MLT.

 

Answer: D

 

 

QUESTION 79  (Topic 2)

 

A technician wants to control the routes being added to the routing table from the BGP routing table. Which statement describes how to do this?

 

A.

BGP filters are applied to all incoming route information.

B.

BGP filters are applied only to external route information.

C.

Metrics determine which routes are inserted into the routing table,

 

 

 

 

D.

BGP adds all new priority routes to the routing table.

 

Answer: C

 

 

QUESTION 80  (Topic 2)

 

An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the campus core. It has determined that 10 Gigabit links are required to replace the existing 1 Gigabit links 1 to the closest. This will affect 18 connections on each of the ERS 8600 switches.

 

Which statement describes how to accomplish this requirement in each ERS 8600 chassis?

 

A.

Replace the two existing switch fabric modules with 8394SF systems.

B.

Replace the two existing switch fabric modules with 8692SF and Supermezz.

C.

Replace the two existing 8616SXE modules with 8612XLRS modules.

D.

Replace the six 8683XLR modules with 8612XLRS.

 

Answer: C

Free VCE & PDF File for Avaya 3605 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 3605 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.