[Free] New Updated (October) Avaya 3605 Real Exam Topic 2, Volume B part 03

Ensurepass

 

QUESTION 91  (Topic 2)

 

 

 

 

Consider the fallowing port conditions on an Ethernet Routing Switch (ERS) 8648GTRS 10/100/1000 Ethernet I/O module left LED -green Right LED – flashing green.

 

What is the status of the port?

 

A.

The link speed is 100 Mbps. and the port is disabled.

B.

The link speed is 1000 Mbps, and the port is disabled

C.

The link speed is 100 Mbps. and the port is passing traffic.

D.

The link speed is 1000 Mbps. and the port is passing traffic.

 

Answer: C

 

 

QUESTION 92  (Topic 2)

 

A technician is troubleshooting some IP telephones that are connected to an Ethernet Routing switch (ERS) 8300 8348TX-PWR I/O module. The IP telephones will not turn on. The 48V LED on the module has been checked and it is steady amber.

 

A.

48V is present.

B.

PoE is disabled.

C.

48V is not available.

D.

Module is booting.

 

Answer: D

 

 

QUESTION 93  (Topic 2)

 

When multiple VLANs are used, Dynamic Host Control protocol (DHCP) relay is required to get the DHCP information from the end user VLAN to the DHCP server.

 

Which statement about how to enable DHCP relay for a VLAN is true?

 

A.

The physical VLAN IP address is used as the DHCP relay agent.

B.

The IP address of the DHCP relay agent is used.

C.

The IP address of the core server VLAN is used

D.

The virtual VLAN IP address is used as the DHCP relay agent.

 

Answer: D

 

 

 

QUESTION 94  (Topic 2)

 

Which commands will configure the labeled Ethernet ports appropriately?

 

clip_image001

 

A.

Config Ethernet 3/1 enable-

diffserv true

config Ethernet 1/1 access-

diffserv true

B.

Config Ethernet 3/1 enable-

diffserv true

config Ethernet 1/1 access-

diffserv false

C.

Config Ethernet 1/1, 3/1 enable-

diffserv true

config Ethernet 1/1 access-

diffserv true

D.

Config Ethernet 3/1 enable-

diffserv true

config Ethernet 3/1 access-

diffserv true

 

Answer: C

 

 

QUESTION 95  (Topic 2)

 

 

 

 

A technician is configuring the core of a Converged Campus network, and is adding a backup-master configuration to an existing Virtual Router Redundancy Protocol (VRRP) configuration for a VLAN that extends to the edge switches. Which benefit is expected from the addition of backup-master?

 

A.

reduced traffic on the Inter Switch Trunks (1ST)

B.

reduced traffic on the uplink ports

C.

redundant default gateways for host devices

D.

reduces VRRP hello packets

 

Answer: A

 

 

QUESTION 96  (Topic 2)

 

In the interaction between EAPO17802.1 and the Enterprise Policy Manager (EPM), what is the role EPM in the User-Based Policy (UBP) process?

 

A.

It passes the user access request to the RADIUS server

B.

It authenticates the user request.

C.

It opens a port.

D.

it applies the required treatment to the access port.

 

Answer: A

 

 

QUESTION 97  (Topic 2)

 

A technician is configuring a Link Aggregation connection from a stack of Ethernet Routing Switch (ERS) 5500 lo a core pair of ERS 8600 switches.

 

Which statement about the correct uplink configuration is true?

 

A.

Distribute uplinks across different ERS 5500 switches in the stack.

B.

Disable auto negotiation and replace it with VLACP to identify single fiber fault failure

C.

Use unique MLT IDS for each stack of edge ERS 5500 switches

D.

Enable Spanning Tree Protocol for the MLT when using it with SMLT in the core of the network.

 

Answer: A

 

 

 

QUESTION 98  (Topic 2)

 

The exhibit indicates the two show commands from an edge Ethernet Routing Switch (ERS) 5520-24T-PWR an untagged frame arrives on port 10.which is configured as an access port

 

To which VLAN will the packet be forwarded?

 

clip_image002

 

A.

All untagged packets will be placed in the default VLAN (VLAN 1).

B.

All untagged packets will be discarded.

C.

All untagged packets will be placed in VLAN 311

D.

All untagged packets will be placed in VLAN 31?

 

Answer: B

 

 

QUESTION 99  (Topic 2)

 

Which steps are initial steps required to configure the Ethernet Routing Switch (ERS) 8600 in a clustered basic core configuration? (Choose three.)

 

A.

create VLANs

B.

create the IST

C.

enables OSPF

D.

configure SMLT

 

Answer: ABD

Explanation: We can enable OSPF later as this is for Routing

 

 

QUESTION 100  (Topic 2)

 

 

 

 

Auto-negotiation should be enabled on all ports except under which condition?

 

A.

When there is a mix of 10 Mops and 1 Gbps end servers

B.

When there are fiber ports in some end workstations

C.

When only the core Pitches support auto-negotiation

D.

When there is a mix of R and RS modules in the stack

 

Answer: C

Free VCE & PDF File for Avaya 3605 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 3605 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.