[Free] New Updated (October) Avaya 6104 Real Exam 1-10

Ensurepass

 


Exam A

 

QUESTION 1

A technician cannot add a Wireless Controller (WC) 8180 to a given Mobility Domain.

 

Which three conditions could cause this problem? (Choose three.)

 

A.

The Active Mobility Domain Controller (AMDC) has failed and the Backup Mobility Domain Controller (BMDC) has taken over the active role.

B.

The Mobility Domain has 32 WCs in it.

C.

The AMDC has failed and a BMDC has not taken over the AMDC role.

D.

The password on the WC is incorrect.

E.

The customer’s license has expired.

 

Answer: BCD

 

 

QUESTION 2

Avaya WLAN 8100 customer network is configured for Auto-RF with Auto channel mode setting set to “Interval”. The default interval for channel algorithm is six hours.

 

During the six hours, if the RF environment deteriorates causing severe communication degradation, what does the system do?

 

A.

It runs the channel algorithm immediately to mitigate the problem.

B.

It runs both channel and power algorithm immediately to mitigate the problem.

C.

It runs the algorithm strictly at every six hour interval.

D.

It runs every one hour even when configured for six hour intervals.

 

Answer: B

 

 

QUESTION 3

On which two platforms can a WLAN Management System (WMS) be installed? (Choose two.)

 

A.

Fedora Linux

B.

Max OS X

C.

Windows XP SP1

 

 

 

 

D.

Windows Server 2003

E.

Windows 2000 Server

 

Answer: CD

 

 

QUESTION 4

A technician is updating a Wireless Controller (WC) 8100 and needs to install the new diagnostic software on the switch. Given the facts below:

 

The Trivial File Transfer Protocol (TFTP) server is at IP address 10.127.48.23

 

The diagnostic image is named WC8180_1.0.3.diag

 

Which Command Line Interface (CLI) command should the technician use to update the diagnostic image on the WC?

 

A.

Download address 10.127.48.23 diag WC8180_1.0.3.diag

B.

Download address 10.127.48.123 image-if-newer WC8180_1.0.3.diag

C.

Download address 10.127.48.23 diag WC8180_1.0.3.diag usb

D.

Download address 10.127.48.23 image WC8180_1.0.3.diag

 

Answer: D

 

 

QUESTION 5

The Dynamic Host Configuration Protocol (DHCP) server administrator has been given Instructions on how to configure the DHCP scopes for option 43 so Access Points (APs) can discover their controllers. The APs still cannot discover any controller in the domain. It has been confirmed that the IP address of the Wireless Controller (WC) has been encoded in the hexadecimal option 43 field.

 

What is the most likely cause of this problem?

 

A.

Hexadecimal format has been used for the IP addresses in option 48; the proper format is ASCII.

B.

The AP 8120 doesn’t support option 43. The administrator needs to make sure the DNS server is specified so the AP can query DNS for the WC address.

C.

The option 43 field needs to contain the WLAN Management System (WMS) IP

 

 

 

 

addressnot the WC address.

D.

The option 43 field does not have the sub-option 08 value of “AVAYA AP” before other sub-options.

 

Answer: D

 

 

QUESTION 6

A technician needs to boot a Wireless Controller (WC) 8100 to a new software image.

Given the facts below:

 

The Trivial File Transfer Protocol (TFTP) server is at IP address 10.127.48.23

 

The new image is to become the primary imago

 

The current running image should not be overwritten

 

The switch is to run the new image on reboot

 

What should the technician do at the enable prompt of the Command Line Interface (CLI) on the WC?

 

A.

Enter download address 10.127.48.23 image WC8180_1.3.0.img and reset.

B.

Enter download address 10.12/.48.23 image WC8180_1.3.0.img, wait until the download is finished, and then enter boot image primary.

C.

Enter the download address 10.127.48.23 secondary image WC8180_1.3.0.lmg, wait until the download is finished, and then enter boot image secondary.

D.

Enter download address 10.127.48.23 primary image WC8180_1.3.0.img and reset.

 

Answer: C

 

 

QUESTION 7

When using Wireless LAN Management System (WMS) for configuration, which command should be executed to synchronize existing configuration on the Active Mobility Domain Controller (AMDC) with other peer controllers within the domain?

 

A.

Apply policies

B.

Import policies

C.

Force config-sync

 

 

 

 

D.

Push config-sync

 

Answer: D

 

 

QUESTION 8

A technician is working for a company that has configured a single Mobility Domain that encompasses multi-building campus. The network link to one of the remote buildings was cut during construction, at the time when the technician was issuing an MD leave command. When network connectivity was restored, the technician issued the MD Join command, but the Wireless Controller (WC) 8180 in that building has not rejoined the Mobility Domain.

 

Which three actions should the technician take to resolve this problem? (Choose three)

 

A.

Check that the Active Mobility Domain Controller (AMDC) IP address is correctly specified on the WC.

B.

Purge the stale entry in the AMDC and re-issue the MD Join command.

C.

Check that the domain secret is correctly specified on the WC.

D.

Check that the WC has its local wireless IP address configured as the Mobility Domain Controller (MDC) address.

E.

Chock to see if the Backup MDC (BMDC) is reachable from the controller.

 

Answer: ADE

 

 

QUESTION 9

With WLAN management System (WMS) user role as “ROLE_ADMIN”, which actions can be performed?

 

A.

Create new users, create configuration, monitor

B.

Create new users, monitor

C.

Create configuration, monitor

D.

Create new users, create configuration

 

Answer: C

 

 

QUESTION 10

 

A technician deploys an Avaya 8120 Point (AP) and connects it to a functioning WLAN Controller 8180 through an Avaya Power over Ethernet (PoE) injector. The link light is solid amber.

 

What should the technician do to resolve this problem?

 

A.

Verify that the PoE source is Avaya-approved.

B.

Confirm AP health using the WLAN Management System (WMS) or the command Line Interface (CU) on the Wireless Controller (WC) 8180.

C.

Reboot the AP by removing and re applying power.

D.

Check if the link speed on the switch port to which AP is connected is 10 Mbps.

 

Answer: D

Free VCE & PDF File for Avaya 6104 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 6104 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.