[Free] New Updated (October) Avaya 6104 Real Exam 21-30

Ensurepass

 

QUESTION 21

A customer has deployed an Avaya WLAN 8l00 system with minimal coverage and has placed all of the Access Points (APs) in operational mode.

 

Assuming that the customer has deployed no other wireless security measures, which behavior should their technicians expect when they enable rogue AP threat mitigation?

 

A.

The APs will send de authentication messages to all rogue APs and their associated clients with Basic Service Set Identifications (BSSIDs) different from their own.

B.

The APs will scan the legal channels, build a rogue mitigation list, and send de- authentication messages to the rogue APs.

C.

The APs will send de authentication messages to the clients associated to rogue APs operating on the same channel as the managed AP.

D.

The APs will scan all channels, build a rogue mitigation list, and send de-authentication messages to all rogue APs and their associated clients.

 

Answer: D

 

 

QUESTION 22

A technician is performing an initial configuration on a Wireless Controller (WC).

 

Which command will accurately set the IP address to 10.127.4S.20 with a 24 bit network mask on a network with no default gateway?

 

A.

ip address 10.127.45.20/24 default-gateway none

B.

ip address 10.127.45.20.255.255.0 0.0.0.0

C.

ip address 10.127.45.20 255.255.255.0 default-gateway 0.0.0.0

D.

ip address 10.127.45.20/24 default-gateway 0.0.0.0

 

Answer: C

 

 

QUESTION 23

 

A technician is configuring the second Wireless Controller (WC) in a mobility domain that will eventually comprise of 27 controllers.

 

What must be done to make this WC a Backup Mobility Domain Controller (BMDC)?

 

A.

At the config- wireless prompt, type controller mdc-capable

B.

At the config-wireless prompt,type controller b-mdc

C.

From the WLAN Management System (WMS), make the controller MDC capable.

D.

In WMS, open the Co
ntroller Dashboard, right click on the Domain Role and choose BMDC.

 

Answer: A

 

 

QUESTION 24

A technician is adding new Access Points (APs) to an Avaya WIAN 8100 Release 1.0 system.

 

What is the authentication option that is supported for authenticating the new APs to their hosting wireless Controller (WC)?

 

A.

Open authentication

B.

Password based authentication

C.

MAC-based authentication

D.

Certificate based authentication

 

Answer: C

 

 

QUESTION 25

To configure a RADIUS authentication server on the WLAN 8180 Controller, which configuration element will be modified and what should be registered as the trusted client in RADIUS server?

 

A.

RADIUS profile, Access Point (AP) profile; AP as trusted RADIUS client

B.

RADIUS profile, network profile; AP astrusted RADIUS client

C.

RADIUS profile, AP profile; controller as trusted RADIUS client

D.

RADIUS profile, network profile; controller as trusted RADIUS client

 

 

 

 

 

Answer: D

 

 

QUESTION 26

Network policy limits voice traffic to 1 MB Committed Information Rate (CIR) on any given link, with an additional burst of 16 kbps. Additional voice traffic is to be dropped. A technician is installing a new Wireless Controller (WC) and must configure this policy on the switch and apply it to port 3.

 

What is the first step in configuring this policy?

 

A.

Configure a shaper on part 3 from Interface Configuration mode using command: qos if- shaper port 3 name 1_mbps-rate 1024.

B.

Configure a meter from Global Configuration mode using the command: qos meter 1 name_mbps committed-rate burst-size 16 in-profile-action 1 out-profile-action-name.

C.

Configure a QoS policy from Global Configuration mode using the command: qos policy 1 enable name drop_1_mbps port 3 in-profile-action 1 non-match-action-name drop

D.

Create a QoS action from Global Configuration mode using the command: qos action 10 name drop_1_mbps drop-action enable.

 

Answer: D

 

 

QUESTION 27

A customer has only one DHCP server on their network and that server has only one network interface. They do not want to have a large broadcast domain and they want to have two client VLANs for WLAN service.

 

Which two steps are required to deploy at a minimum cost? (Choose two.)

 

A.

Enable DHCP relay function on the switches which are interconnecting client VLANs.

B.

Configure two DHCP scopes on the DHCP server.

C.

Setup one DNS server on the client network.

D.

Use a static IP address and static switch IP address for the Access Point (AP) discovery process.

E.

Configure option 43 for the client to use two different networks.

 

Answer: AB

 

 

 

QUESTION 28

Hit’ network design calls for the 2.4 GHZ radio to operate in 801.11n access mode and the 5GHz radio to operate as a dedicated Wireless Intrusion Detection System/Wireless Intrusion Prevention System (WIDS/WIPS) sensor. In configuring the Access Point (AP) profile There is no option to make 5 GHz radio WIDS/WIPS.

 

What is the most likely cause for this?

 

A.

WIDS/WIPS mode is not supported on the 5 GHz radio.

B.

A network profile was previously selected for the 5 GHz radio.

C.

A radio profile with WIDS/WIPS enabled must first be created, and then select that radio profile in the AP profile.

D.

The AP does not have Auto-RF enabled.

 

Answer: C

 

 

QUESTION 29

Voice users of the network are complaining about clipping during voice calls.

 

What should be done first to see if there is a configuration problem?

 

A.

Check the radio and network profiles for proper Quality of Service (QoS) settings.

B.

Check the AP profile for proper QoS settings.

C.

Check the network profile to disable Wifi Protected Access (WPA2) security settings.

D.

Make sure Wireless Intrusion Detection System (WIDS) mode is disabled in the radio profile.

 

Answer: A

 

 

QUESTION 30

A technician is planning to install a WLAN 8100 system for a customer, the customer is using WPA2- enterprise security for their employees and Captive Portal (CP) for guest users.

 

Which mandatory components should be prepared before installing WLAN 8100 system?

 

 

 

 

 

A.

FTP server, PoE switch, DHCP server and LDAP

B.

TFTP server, PoF switch, DHCP server and RADIUS server

C.

HTTP server, PoE switch, DNS server and RADIUS server

D.

HTTP server, PoE switch, DHCP server,DNS and RADIUS server

 

Answer: D

Free VCE & PDF File for Avaya 6104 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 6104 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.