[Free] New Updated (October) Avaya 6104 Real Exam 31-40

Ensurepass

 

QUESTION 31

A client cannot connect to the wireless network, and a check of the trace log reveals a “Status: FAIL from AAA” message. The log files on the Remote Authentication Dial In User Service (RADIUS) server do not provide any further information on the failure.

 

What should the technician troubleshooting this problem do?

 

A.

Check that the RADIUS IP address and port number are correctly configured on the Wireless Controller (WC).

B.

Check that third party dot1x supplicants are not interfering with the authorization process.

C.

Check the RADIUS shared secret on both the WC8180 and the RADIUS server.

D.

Check that the IP route table on the WC is correct.

 

Answer: A

 

 

QUESTION 32

A customer is using DHCP option 43 for VoIP telephone provisioning service, but it is unavailable for Access Point discovery.

 

In this situation, what is an alternate solution for Access Point (AP) discovery procedure?

 

A.

Use a static IP configuration on the AP.

B.

Register wc1. wc2, wc3, wc4 for controllers’ DNS names and use these DNS names for AP discovery.

C.

Separate an AP network and a telephone network and use different DHCP servers for each network.

D.

Put one more DHCP server, which has a different DHCP option 43 for WLAN system AP, in the network.

 

 

 

 

 

Answer: B

 

 

QUESTION 33

There are four RADIUS authentication servers throughout the network which a technician can use for configuring Captive Portal (CP) user authentication.

 

What is the most effective way to use the RADIUS servers in the CP configuration?

 

A.

Configure the CP to load balance among all four servers.

B.

Configure RADIUS server group with four RADIUS servers and configure the CP to reference the RADIUS server group in network profile.

C.

Configure the CP to query the servers in sequence in the event of server timeout.

D.

Configure the CP to reference one RADIUS server once its local database is full.

 

Answer: B

 

 

QUESTION 34

A technician is replacing a failed WLAN Management System (WMS) server and wants to import a saved configuration onto the new server. The new Access Point (AP) license has already been installed on the new WMS and everything is working.

 

What is the best way to import a previously saved configuration?

 

A.

Put the backup configuration files in C:Program FilesAvayaWMSconf and restart WMS.

B.

Manually add all WC(s) in the domain, and then sync the policies from the Active Mobility Domain Controller (AMDC).

C.

Put the backup configuration files in C:Program FilesAvayaWMSbackup and then in WMS go to configuration to Database Backup and choose the file to be imported.

D.

Load the backup configuration directly into MySQL.

 

Answer: B

 

 

QUESTION 35

 

A technician has completed the initial configuration on a Wireless Controller (WC) 8180, but the WLAN Management System (WMS) is unable to locate the WC 8180 to push out the full configuration. The technician has blocked that the IP address entered in WMS is correct. The technician has also connected by Telnet into the WC 8180 and can ping the WMS server from there.

 

What is the technician’s next step to resolve this problem?

 

A.

check the firewall to ensure that it has an opened range of TCP/UDP ports beginning with 61000

B.

Check to ensure that the controller is SSH-enabled.

C.

Chock to ensure that IP routing is enabled on the WC.

D.

Check to ensure that the Simple Network Management Protocol (SNMP) server is enabled on the WC

 

Answer: A

 

 

QUESTION 36

How many managed Access Points (APs) can be monitored using a WLAN Management System (WMS) base license?

 

A.

0

B.

32

C.

64

D.

256

 

Answer: C

 

 

QUESTION 37

Which statement describes the WLAN 8180 controller AC/DC power specification?

 

A.

It operates only on AC power: 110 – 120 VAC / 60 Hz.

B.

The maximum power consumption is 190 Watts.

C.

Power over Ethernet (Pot) is supported on the ports in front panel.

D.

Wireless Controller (WC) 8180 does not support dual power supply.

 

Answer: B

 

 

 

QUESTION 38

A technician is installing the Avaya WLAN 8100 in an older network, and some of the switches in the network support only for 802.1p priority queues. The network policy requires voice traffic to get priority over data traffic at Layer 2.

 

When working from the enable prompt on a wireless controller (WC), which command will provide the information needed to configure the correct queue set?

 

A.

Show qos policy all

B.

Show qos queue-set-assignment

C.

< font face="Arial">Show qos queue-set-action

D.

Show qos 12-act

 

Answer: B

 

 

QUESTION 39

Which two Command Line Interface (CLI) commands on a peer controller will help the technician to validate the existence of an Active Mobility Domain Controller (AMDC) controller on the network its state and its IP address? (Choose two.)

 

A.

show wireless domain status

B.

show wireless controller status

C.

wireless domain peer – controller status

D.

show wireless controller info

E.

show wireless domain peer-controller status

 

Answer: BE

 

 

QUESTION 40

A technician has configured the first Wireless Controller (WC) 8180 through the Command Line Interface, and needs to import it into a WLAN Management System (WMS). A new Mobility Domain in WMS been configured and the WC needs to be added into the domain, but the operation is failing.

 

 

 

 

What is the most likely cause of this problem?

 

A.

Wireless is not enabled on the WC.

B.

The WC 8180 isn’t configured to be Mobility Domain Controller (MDC) capable.

C.

The domain network profiles and Access Point (AP) profiles are out of sync with the WCS.

D.

WMS doesn’t have an AP license installed for managing WLAN 8100 components.

 

Answer: D

Free VCE & PDF File for Avaya 6104 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 6104 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.