[Free] New Updated (October) Avaya 6207 Real Exam 11-20

Ensurepass

 

QUESTION 11

A technician has installed the RedHat Operating System (OS) from the ks.cfg kickstart file provided on the RedHat CD/DVD media. At the boot prompt, Linux ks = cdrom is entered to point to the location of the kickstart file, but the installation wizard is unable to continue the silent Installation.

 

What are two possible reasons for this? (Choose two.)

 

A.

The ks.cfg file is no in the root directory of the CD/DVD media.

B.

The ks.cfg file is in the root directory of the CD/DVD, but does not have the IP addresses of the Network Interface Cards (NICs).

C.

The ks.cfg is corrupted.

D.

The specified size of the /var partition in the kickstart file is too small.

E.

The ks.cfg file was created using an earlier version of the kickstart tool.

 

Answer: AC

 

 

QUESTION 12

A technician has installed an Avaya Aura Viewer on one server, and the eWare databases on-another server or a customer using a named instance. The Viewer needs to be linked to the Avaya Contact recording (Avaya CR) system.

 

Which two entries need to be setup on the Avaya CR to make it work? (Choose two.)

 

A.

Add the property “eware.sqlserverport = the port number for the named instance]” into the cscm.properties file.

B.

Insert the database server IP address and port number for the named instance,

 

 

 

 

separated by comma, into the Replay Server field in the Avaya CR.

C.

Add the property “viewer.sqlserverport = the port number for the named instance]” into the cm.properties file.

D.

Insert the database server IP address into the Replay server field in the Avaya CR.

E.

Add the property “eware.viewerhostname = [fully qualified domain name of Viewer Server]” the cscm.properties file.

 

Answer: A

Explanation: 239 Avaya Contact Recorder Planning, Installation and Administration Guide

 

 

QUESTION 13

Going to which website provides the ability to activate a license for Avaya Aura Contact Recording (Avaya CR) RIs. 10?

 

A.

www.avaya.com/acrlicense

B.

www.verint.com/avaya

C.

www.verint.com/acr

D.

www.avaya.com/license

 

Answer: C

 

 

QUESTION 14

A technician has successfully installed the Avaya Aura Viewer software on a client site, and is in the progress of configuring the software. the client wants to add a few users to the system that will have enough access to build and release queries.

 

Which user role must be assigned to these newly added users?

 

A.

Administration users

B.

Audit users

C.

Builder users

D.

Enterprise users

 

Answer: C

 

 

Explanation: 35 Viewer Installation Guide

 

 

QUESTION 15

A technician has successfully installed the Avaya Aura Quality Monitoring (Avaya QM) software on a client site, and needs to configure the software. The Avaya QM solution is being deployed as a single server solution.

 

Which server roles must be enabled as a minimum to complete the deployment?

 

A.

BDR Server, Search Server, Web Server, eRecorder Server, Command Server

B.

BDR Server, Search Server, Web Server, eRecorder Server

C.

BDR Server, Search Server, Web Server

D.

eRecorder Server

 

Answer: A

Explanation: Page 52,53 Nortel Quality Monitoring

 

 

QUESTION 16

A technician has installed Avaya Aura Contact Recording (Avaya CR) and is trying to access the Avaya CR Login page for the first time. However, a message is received that the internet browser being used cannot display the webpage.

 

Which service should be chocked to ensure that the web page can be accessed?

 

A.

acr

B.

postgres

C.

cscm

D.

tomcat

 

Answer: C

 

 

QUESTION 17

 

A customer has installed two Network Interface Cards (NICs) on an Avaya Aura Contact Recording (Avaya CR) server. They are unable to capture Real-time Transport Protocol (RTP) packets.

 

What are two possible reasons they are encountering this problem? (Choose two.)

 

A.

The wrong NIC has been selected to use for RTP.

B.

There is no network path between the Avaya Aura Communication Manager (Avaya CM) media resources and the NIC on the Avaya CR server to use for RTP.

C.

There is no network path between both NICs and the recoded IP phones.

D.

The gateway has not been set up on the NIC for only Search and Replay purposes.

 

Answer: AB

 

 

QUESTION 18

A technician has successfully installed the Avaya Aura Contact Recording (Avaya CR) software or client site, and needs to configure the software.

 

Which switch typo is used with the Linux version of the Avaya CR?

 

A.

Avaya Communication Server 1000

B.

Avaya Communication Server 2×00

C.

Avaya Communication Manager

D.

Avaya IP Office

 

Answer: C

 

 

QUESTION 19

A technician has installed two Avaya Aura Contact Recording (Avaya CR) servers, where one is acting as a “master” and the other as a “standby”. The technician wants to perform failover tests prior to putting the system into production. The configuration is where the standby Avaya CR is located at remote with enterprise Survivable Server (ESS) support, and it is co
nfigured to connect to its own Application Enablement Service (AES) server, also located at the remote site.

 

Which are two tasks that could he performed to verify failover without affecting normal

 

 

 

 

customer operation? (Choose two.)

 

A.

Shutdown the AES server at the remote site.

B.

Act on both the Avaya Aura Communication Manager (Avaya CM) media gateway and the ESS at the remote site so that it is not able to see the Avaya CM main server. This way the media gateway will register to the ESS and standby Avaya CR system, which will take over.

C.

Unplug the LAN cable(s) from Master Avaya CR.

D.

Stop the “cscm” service on Master Avaya CR.

E.

Unplug the LAN cable(s) from standby Avaya CR.

 

Answer: BC

Explanation: 346 Avaya Contact Recorder Planning, Installation and Administration Guide

 

 

QUESTION 20

When going in the Viewer and searching for all call, a technician notices that none of the call appears in the list stored in Viewer.

 

What could be checked to find the cause of this problem?

 

A.

Access the Avaya Contact Recording and review the Recorder Status > Server page.

B.

Review the Viewer Administration function > Roles and conform that the UserID that was used to login to viewer as is in the Audit Users role.

C.

Login to the Avaya Aura Quality Monitoring (Avaya QM) system > Admin, and confirm the Viewer UserID has been enabled n the “general” tab > “viewer Enabled”.

D.

Within Viewer, confirm the UserID that is being used to login, check the Blocked Users tab and make sure the ID is not in the list.

 

Answer: A

Explanation: 137 Compliance Recorder System Administration Guide

Free VCE & PDF File for Avaya 6207 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 6207 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.