[Free] New Updated (October) Avaya 7003-1 Real Exam 21-30

Ensurepass

 

QUESTION 21

A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0. They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co-Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.

 

Which action must be taken to consolidate the servers?

 

A.

Re-configure the Call Server IP address field in each Media gateway Controller

B.

Re-configure the Telephony Node Information to reflect the Call Server ELAN IP

C.

Re-configure the DSP Daughterbaords to reflect Call Server ELAN IP.

D.

Re-configure the network Routing Service to reflect the Call Server ELAN IP address.

 

Answer: A

 

 

 

QUESTION 22

A technician is completing the configuration of a new IP node for a system. All files have been transferred and synchronized, and `restart applications’ is clicked for the selected servers.

 

What will this cause the system to do?

 

A.

Reboot the Linux Server running the signaling server.

B.

Restart the signaling server application on selected servers.

C.

Restart the application on selected servers.

D.

Restart Jboss and the Signaling Server applications on the selected servers.

 

Answer: C

 

 

QUESTION 23

A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.

 

How does the customer access the configuration menu for the MGC?

 

A.

Type “mgcsetup” on the screen.

B.

No action required. The MGC will boot directly into the setup menu.

C.

The prompt “Press any key to stop auto-boot enter mgcsetup” appears.

D.

Enter a shell command : <CTRL>0<CTRL>M, provide OAM username and password to access OAM shell.

 

Answer: B

 

 

QUESTION 24

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.

 

 

 

 

MG1: CPMG 128

 

MG2: MGC 128 DSP DB in position 2

 

MG3: MGC 128 DSP DB in position 2

 

After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?

 

Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

 

A.

Numbering of VGW channels: 128

Trunk data block VGW

Terminal number: 004 0 02 0

Designator field for trunk: DSP

Extended trunk DSP DB 128

Customer number: 00

B.

Numbering of VGW channels: 128

Trunk data block VGW

Terminal number: 004 0 01 0

Designator field for trunk: DSP

Extended trunk DSP DB 128

Customer number: 00

C.

Numbering of VGW channels: 128

Trunk data block VGW

Terminal number: 004 0 00 0

Designator field for trunk: DSP

Extended trunk DSP DB 128

Customer number: 00

D.

Numbering of VGW channels: 128

Trunk data block VGW

Terminal number: 004 0 11 0

Designator field for trunk: DSP

Extended trunk DSP DB 128

Customer number: 00

 

Answer: D

 

 

QUESTION 25

A technician has just installed and configured a System Manager as the primary security

 

 

 

 

Server and configured a Member Security Server with the Element Manager and Subscriber Manager Applications deployed. The Communication Server (CS) 1000E Rls. 7x Call Server is part of this server security domain. All connections are up and running. When the new CS 1000 Rls. 7x system link on the elements window is clicked, the web browser returns with the following message.

 

“Destination IP address cannot be reached”

 

What is causing the problem?

 

A.

The browser window has not been refreshed.

B.

The Element Manager is unable to reach the MC32S via the ELAN.

C.

The Public Key Certificates for Web SSL were not added in the Call Server.

D.

The wrong Call Server IP address was entered during the application deployment.

 

Answer: D

 

 

QUESTION 26

A technician is installing the Linux Base Operating System software on the CPDC server for the Avaya Aura system and steps away while the software is loading. When the technician returns, he verifies that the Linux base installation is complete and successfully installed.

 

What status can the technician verify to ensure the installation is successful?

 

A.

There is no visible indication available.

B.

The Linux server reboots and the FQDN login prompt appears.

C.

The status of Linux Hardening items is displayed and the system reboots.

D.

The Linux server reboots and the Linux Status Completion screen appears.

 

Answer: B

 

 

QUESTION 27

A customer that has an existing option 11C chassis system with an SCC card is planning t o upgrade to a Communication Server (Rls.) 1000E Rls. 7x system. A CPMG Co-Resident server card will be installed.

 

 

 

 

Which action must be completed manually?

 

A.

The digital Trunk Numbers must be reprogrammed with a new format

B.

The IP Phones Terminal Numbers must be entered with a new format

C.

The IP address for each Ip media Gateway must be entered in LD 97

D.

The tone Receiver Terminal Numbers must be re-Programmed with new format

 

Answer: C

 

 

QUESTION 28

A technician is planning on upgrade of an option 11C 5 x system to a Communication Server (CS) 1000E Rls. 7 x System with CPMG Co-resident Call server and Media Gateway Controller.

 

To perform the Linux Base software installation on the CPMG which component is required?

 

A.

Bootable Compact Flash (1 Gigabyte)

B.

Bootable USB drive/disk (2 Gigabyte)

C.

External CDROM drive

D.

Bootable Compact Flash (2 Gigabyte)

 

Answer: B

 

 

QUESTION 29

Click the Exhibit button.

 

 

 

 

 

clip_image001

 

A customer has added a new Communication Server 1000E (CS 1000E) Standard Availability to their existing network of CS 1000M Single Group system. They are planning to use some of the spare digital telephone on the new system as well as new IP telephone.

 

With reference to system showing three vacant slots, which two components are required to configure the system so that the digital telephone are supported and can communicate with the IP telephone? (Choose two)

 

A.

TMDI Card

B.

IP Line Card

C.

Digital Line Card

D.

CPPM Signaling Server

 

 

 

 

 

Answer: CD

 

 

QUESTION 30

A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories. A technician logs into Elements manager to complete the configuration, after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.

 

What is expected outcome from the system?

 

A.

The node file will be transferred from Signaling Servers to the call serve
rs, and INI files will be transferred from the call server to the selected servers.

B.

The node file will be transferred from Call Servers to the Signaling servers, and the INI files will be transferred from the Call Servers to the selected servers.

C.

The node file will be transferred from Signaling Servers to the Call Server, and the INI files will be transferred from Call Servers to the Signaling servers.

D.

The node will be transferred from Element manager to the call server, and INI files will be transferred from Element manager to Call Server.

 

Answer: B

Free VCE & PDF File for Avaya 7003-1 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 7003-1 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.