[Free] New Updated (October) Avaya 7003-1 Real Exam 31-40

Ensurepass

 

QUESTION 31

Refer to the exhibit.

 

 

 

 

 

clip_image001

 

A Communication Server 1000E Rls. 7 x customer is adding a new Human Resources department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory numbers (DNs) from their DID range (2000- 2099).

 

Which numbers sequence is available to meet the customer’s requirements?

 

A.

2001-2008

B.

2010-2017

C.

2050-5057

D.

2091-2099

 

Answer: D

 

 

QUESTION 32

A customer with a Communications Server (CS) Rls. 6.0 HA system with two IPMGs and dual CPPM signaling Servers is upgrading their system to release 7x with Avaya Aura integration with Session Manager. The system is part of an IP peer network that includes a NRS database that needs to be converted and imported into the System Managre.

 

Which upgrade setup is correct?

 

A.

Use NRS manager to download the NRS backup file to compact flash and upload the

 

 

 

 

nrs.xml file into system manager for automatic database conversion

B.

Use Element Manager to download the Signaling Server backup file to a compact flash and upload the nrs.xml file to CS 100 NRS data Conversion Tool to convert so it can be imported into Session Manager

C.

Use NRS manager to download the NRS backup file to the local PC and upload the nrs.xml file to the 1000 NRS data Conversion Tool to convert so it can be imported into System Manager

D.

Use Element Manager to download the Signaling Server backup file to the local PC and convert the nrs.xml file using the data conversion Tool in the utilities folder in the Linux Base compact flash

 

Answer: C

 

 

QUESTION 33

A customer has a Communication Server (CS) 1000Rls. 7x system and installing a stand- alone CPDC Signaling Server.

 

Which role should be chosen during the IP Telephony node Configuration?

 

A.

Backup

B.

Follower

C.

Leader

D.

Alternate

 

Answer: C

 

 

QUESTION 34

A technician is planning to upgrade a customer’s existing Communication Server 1000E Rls. 6.0 system. During the upgrade, a CPPM server card from storage will be added to provide an additional signaling server.

 

Which two statements describes what must be done to the CPPM server card to distinguished it as a signaling Server (Choose two)

 

A.

Set switch 5 to position 1.

B.

Set switch 5 to position 2.

C.

Install one Compact Flash Drive (RMD) and one Hard Drive (FMD)

 

 

 

 

D.

Install one Compact Flash Drives (one RMD and one FMD)

 

Answer: BC

Explanation: From – NN43041-

310_05.06_Communication_Server_1000E_Installation_Commissioning.pdf – Doc enclosed

See Page 52 – Text in Brackets [] are added.

“CP PM card dip switch settingsThe CP PM card used in a VxWorks-based Server configuration [Call Server] must have switch S5 in position 1 to indicate that a Compact Flash (CF) card is used for the Fixed Media Drive (FMD).

 

The CP PM card used in a Linux-based Server configuration [Signaling Server] must have switch S5 in position 2 to indicate that a hard disk is used for the FMD.”

 

 

QUESTION 35

A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.

 

What is displayed on the CPMG LED display to confirm successful registration?

 

A.

The MGC display will read “PASS”

B.

The MGC display will read “LOAD”

C.

The MGC display will read “Exxx” (E000)

D.

The MGC displa
y will show Superloop and shelf number of MG 1000E

 

Answer: D

 

 

QUESTION 36

A customer has deployed a Communications Server 1000Rls. 7x system at their site. Their sales department is expanding and has asked that five new telephones be added with the same capabilities as the existing telephones in the department.

 

Which programming command should be used to complete this task?

 

 

 

 

 

A.

Move to DN

B.

Move from DN

C.

Copy from DN

D.

Copy from TN

 

Answer: D

 

 

QUESTION 37

A technician is installing a new Communication Server (CS) 1000E Rls. 7x system for a customer. The requirements include installation of IP telephones for a small group of inside sales people. The telephones have been configured and are ready to be registered.

 

Which two items are to be entered when performing the IP telephone registration? (Choose two)

 

A.

The Directory Number

B.

The Node ID

C.

The Terminal Number

D.

The Customer Number

 

Answer: BC

 

 

QUESTION 38

A technician has configured a new media gateway by connecting to the serial port for the MGC and entering network information for the card as well as the IP address for the Primary call server. When the MGC reboots, the faceplates displays UNRG. The Call Server console `IPMG registration denied’.

 

What should be done to solve this problem?

 

A.

Ping from the MGC to the call server over the E-LAN

B.

Check to ensure the TLAN cable for the MGC is connected and active

C.

Check to ensure the IPMG has been configured on the call server

D.

Power cycle the MGC card to force it to register

 

Answer: C

 

 

 

QUESTION 39

A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.

 

Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

 

A.

LD 10, 11, 15 and 20

B.

LD 10, 11, 20 and 32

C.

LD 10, 11, 20 and 30

D.

LD 20 and 32

 

Answer: B

 

 

QUESTION 40

A customer requires an upgrade from release Communication Server 1000E Rls. 7x. the current system has a release 5.0 CPPM Call Server and an ISP 1100 Signaling Server. They have 874 IP telephone users and 810 TDM telephone deployed.

 

Which upgrade will support the customer’s current deployment scenario?

 

A.

Replace the CPPM and ISP 1100 with a COTS 2 server deployed as a Co-Resident Call Server and Signaling Server.

B.

Upgrading the CPPM Call Server software to release 7.0 and deploy it as a Co-resident Call Server and Signaling Server Decommission the ISP 1100 Signaling Server.

C.

Replace the CPPM and ISP 1100 with a CPDC server deployed as a Co-Resident Call Server, Signaling Server.

D.

Upgrade the bios and the call Server software. Replace the ISP 1100 with a CPDC server deployed as a Signaling Server.

 

Answer: C

Free VCE & PDF File for Avaya 7003-1 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

This entry was posted in 7003-1 Real Exam (October) and tagged , , , , , , . Bookmark the permalink.